THE CRANE CAMERA SYSTEM CAB BE INSTALLED ON ANY KIND OF CRANE:
The Crane Camera System can be used on virtually any kind of crane in any operating
environment. Installation is only possible when the crane is already fully assembled on a job site or during operation. |
INSTALLATION IS POSSIBLE IN AS LITTLE AS TWO HOURS:
The Crane Camera system is designed for quick and
easy installation. It is just a matter of mounting the camera housing on the boom and installing the monitor inside the operator's cabin. Running the cable from the cabin to the end of the boom is the
most time consuming part of the process. Simple welding of the mounting plate (included in the package) completes the installation.
|
NO SPECIAL ADJUSTMENTS OR PROCEDURES NEEDED:
Following the installation,
the Crane Camera System is ready to operate. It requires no calibration or adjustments. Once all the connections are made, switch it on and it is ready to go. |
| |
ALL HARDWARE IS PROVIDED:
The Crane Camera system comes with all the
necessary hardware, from mounting plate to screws for the camera housing. The only requirement is a steady platform inside the operator's cabin (5 by 5 inches) to place the control unit & the monitor and
a connection to the crane's
battery.
|
| |
POWER SUPPLY:
The Crane Camera system runs on 24V DC current. No special
considerations are necessary. However, the system does require constant 24V output in order to function
properly.
|
| |
TECHNICAL SUPPORT:
Our office is available to answer any questions or
help to troubleshoot a potential problem 24-hours a day, 7 days a
week.
|
| |
MAINTENANCE:
The Crane Camera system requires little or no maintenance.
It is designed for daily operation in the most demanding circumstances. With normal use the camera will give you years of trouble-free
operation.
|
| |
EASE OF OPERATION:
The Crane Camera system is as easy to operate as your
TV's remote control! It's x-y axis movement is controlled by arrow buttons. Pressing any one of them, moves the camera (and the image) in that direction. Other controls are similarly user-friendly. It will
take a crane operator less than 10 minutes to master the controls even in the absence of written instructions. |
|
